LINE LEDGERFitment, from the sourceRESEARCH PREVIEW

UK

Husqvarna 325iLK: strimmer line diameter

Line diameter for the T35 M10 trimmer head (factory head), from the manufacturer’s UK source. Use the size your manual gives for the head fitted to your tool.

T35 M10 trimmer head (factory head)

Answer

  • 2.0–2.4 mm · Whisper twist line

At a glance

MakeHusqvarna
Model325iLK
Marketthe UK
Head fittedT35 M10 trimmer head (factory head)
Line diameter2.0–2.4 mm
ShapeWhisper twist line
Source typeHusqvarna product page and operator’s manual; line size and head
ScopeUK / Germany / France / Spain / Italy · husqvarna.com country pages list this model
Last checked2026-10-20

Bump-feed head: tap the head on the ground to release line, as the manual describes. Do not go past the line size or length the manual gives.

Replacement part numbers

No replacement part number is verified for this exact model and market.

Source: Husqvarna 325iLK + TAB850 operator’s manual (2025-02) ↗ · checked 2026-10-20

Using this record

Match three things before you buy line: the model name on the rating plate, the head fitted to the tool, and the diameter in the table above. If the head has been replaced, this record may not apply; follow the instructions of the head you now have.

If the line does not fit or keeps breaking

Other Husqvarna models in the UK

Each link opens that model’s own record, with its head, line diameter and manufacturer source.

How this record was checked

The diameter and part numbers are copied from the cited page or manual, not estimated or averaged across models. The record carries the date it was last checked. Manufacturers change specifications between production runs, so confirm the rating plate and the current manual before you buy.

Same model name, different product: regional versions can differ. Match the rating plate.